QbD for hot-melt extrusion

Holistic QbD approach for hot-melt extrusion process design space evaluation: Linking materials science, experimentation and process modeling

The aim of this work was to investigate the relationship between formulation material properties, process parameters and process performance for the manufacturing of amorphous solid dispersions via hot-melt extrusion (HME) using experimentation coupled with process modeling. Specifically, we evaluated the impact of the matrix copovidone melt rheology with and without the addition of a plasticizing surfactant, polysorbate 80, while also varying the process parameters, barrel temperature and screw speed, and keeping fill volume constant. To correlate the process performance to a critical quality attribute, we used telmisartan as an indicator substance by processing at temperatures below its solubility temperature in the polymeric matrix.

We observed a broader design space of HME processes for the plasticized formulation with respect to screw speed than for the copovidone-only matrix formulation. This observation was determined by the range of observed melt temperatures in the extruder, both measured and simulated. The reason was not primarily linked to a reduced shear-thinning behavior, characterized by the power law index, n, but instead more to an overall reduced melt viscosity during extrusion and zero-shear rate viscosity, η0, accordingly.

We also found that the amount of residual crystallinity of telmisartan correlated with the simulated maximum melt temperature in the extruder barrel. This finding confirmed the applicability of the temperature-dependent API-matrix solubility phase diagram for HME to process development. Given the complex inter-dependent relationships between material properties, process and performance, process modeling combined with reduced laboratory experimentation was established as a holistic approach for the evaluation of Quality-by-Design-based HME process design spaces. More on hot melt extrusion