10 Errors that can occur during the coating process and how to avoid them

Many parameters must be considered before and during the coating process. Sometimes it is necessary to adjust parameters to get the best possible result.
The correct and precise choice of process parameters is crucial for a flawless result and an optimal coating. Various influencing factors can lead to useless coating results. If the tablet is too soft or the tablet shape has been chosen incorrectly. But also a too low air pressure or a too high spray rate can lead to unwanted results. To avoid this and to optimize the coating process, many changes can be made.

The top 10 mistakes

Orange Peel

Logo Bridging

Twinning

Sticking & ripping off

Scuffing

Capping

Color variation I

Color variation II

Peeling

Friability

In the BIOGRUND Troubleshooting Guide you will find possible reasons and solutions for the respective problem, which will make your troubleshooting easier and faster.

You can download Troubleshooting Guide here:

In the BIOGRUNDs Product Overview you will find detailed product information on all products.
You can also get in contact per mail [email protected].

You can download the Production Overview here:

Product Inquiry for Biogrund Film Coatings

You might also like